Army Dress Blues Insignia Placement
army blues dress placementRelated Article Army Combat Engineer MOS 12B. Black leather shoes are the footwear that most will wear with the Army Dress Uniform.
Sleeve Insignia Placement Uniform Insignia Insignia Women S Army Corps
And 3 inches above the bottom of the sleeve on the Army white dress uniform.
Army dress blues insignia placement. Insignia pin 58 inch above the notch on both collars with the centerline of the insignia bisecting the notch parallel to the inside edge of the lapel. The bottom of the insignia disk will be 1 inch above the notches on the collar with the center line of the insignia bisecting the notch and parallel to the inside edge of the collar on the Army green Army white and Army blue uniform coats. The RDI is worn so that the vertical axis of the insignia is perpendicular to the ground see fig 21137.
The RDI centered 18 inch above the top of the pocket flap or 14 inch above any unit awards or foreign badges that are worn. Quick Ribbon notes for Army Blue Uniforms. 1 2 3 Next.
Stripes are gold lace in ¼ inch ½ inch or 2 inch widths depending on rank. Place the bottom of the US. The insignia is displayed again on the right side between the top and middle button of the mess dress jacket.
Females may adjust the placement of the ribbons to conform to individual body-shape differences. Insignia disk approximately 1 inch above the notch centered on the right collar with the centerline of the insignia parallel to the inside edge of the lapel. The branch insignia is positioned so that the centerline of the insignia bisects the centerline of the US.
When wearing the CSIB only one insignia is authorized for wear at a time but it can be worn with joint and Army staff badges like on the ASU. On the Army green blue and white coats male officers wear their branch insignia centered on both lapels 114 inches below the US. The stripes are sewn onto each sleeve so as to be parallel with the cuff and completely encircle the sleeve.
Male personnel wear the ribbons centered 18 inch above the left pocket. For example on the Army service dress blue officers should place the US. Army Service Uniform and Dress Blue Uniform-Female page 70 Composition 1411 page 70 Accessories 1412 page 77 Materials 1413 page 77 Insignia accouterments decorations badges unit awards and appurtenances 1414 page 78 General guidelines 1415 page 78 Coat Army blue 1416 page 79.
All other officers and enlisted personnel will wear slightly lighter blue color pants. If a nametape US. Wear the crest 14 inch above unit awards and foreign badges if worn.
Insignia and is parallel to the inside edge of the lapel see fig 28118. On the white mess uniform the RDI is worn 12 inch below the notch centered on the lapel. During initial entry training males will wear the US insignia on both.
The joint and Army staff badges are worn on the left side of the ASU and Army mess dress jacket. Army tape or grade insignia is sewn on then personnel must sew all three of these items on the uniform coat. The upper end of the stripe is inserted in the back seam of the sleeve on the Army blue dress mess and evening mess uniforms and on the Army white mess and evening mess uniforms.
And Branch Insignia Placement. A device of silver color metal and enamel 2 inches 508 cm in diameter consisting of a white disc with a blue border an inner white disc with a red border bearing a blue and white. Female personnel wear the ribbons centered on the left side with the bottom row positioned parallel to the bottom edge of the nameplate.
The darker blue version is worn by general officers. On the blue mess uniform the RDI is worn centered on the satin facing 12 inch below the notch in the lapel. The lower edge of the bottom stripe is 2 inches from the edge of the cuff and there is a ¼ inch space between stripes.
How is the Regimental Distinctive Insignia RDI worn on the male Army Blue Service Uniform. This requirement does not apply to the patrol cap.